ZyXEL Communications VMG4927-B50A - Page 104

Chapter 7 Wireless
VMG4927-B50A / VMG9827-B50A / VMG3927-B50B User’s Guide
104
3 Press the WPS button for more than five seconds on the VMG.
Or
Click Add Extender in the Multy Pro App. Install from Google Play or the Apple App store.
The following figure shows the Multy Pro application. Device Z is the VMG. Device A is a Multy-Pro-
supported extender in AP mode. Devices B and C are Multy-Pro-supported extenders in repeater Mode.
Figure 45 MESH Application
Click Network > Wireless > MESH. The following screen displays.
Figure 46 Network Setting > Wireless > MESH
The following table describes the labels in this screen.
Table 25 Network Setting > Wireless > MESH
LABEL DESCRIPTION
MESH Select Enable to activate MESH and have the VMG apply the wireless name, password, and
security type of the main 2.4G wireless network to the main 5G wireless network. A warning
displays when you select Enable (see Figure 47 on page 105
).
Note: When MESH is enabled, the following settings become not configurable:
•The Keep 2.4G and 5G WiFi network name the same setting in the Network Setting > Wireless
> WiFi and Network Setting > Wireless > WiFi > Edit screens.
•The WPS setting in the Network Setting > Wireless > Advanced screen.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.