VMG4927-B50A / VMG9827-B50A / VMG3927-B50B User’s Guide
42
CHAPTER 4
Tutorials
4.1 Overview
This chapter shows you how to use the VMG’s various features.
• Set Up an ADSL PPPoE Connection, see page 42
• Set Up a Secure WiFi Network, see page 45
• Set Up Multiple Wireless Groups, see page 53
• Configure Static Route for Routing to Another Network, see page 56
• Configure QoS Queue and Class Setup, see page 58
• Access the VMG Using DDNS, see page 62
• Configure the MAC Address Filter, see page 63
4.2 Set Up an ADSL PPPoE Connection
This tutorial shows you how to set up an ADSL Internet connection using the Web Configurator.
If you connect to the Internet through an ADSL connection, use the information from your Internet
Service Provider (ISP) to configure the VMG. Be sure to contact your service provider for any information
you need to configure the Broadband screens.
1 Click Network Setting > Broadband to open the following screen. Click Add New WAN Interface.
2 In this example, the DSL connection has the following information.
General
Name MyDSLConnection
Type ADSL
Connection Mode Routing
Encapsulation PPPoE
IPv6/IPv4 Mode IPv4
To Next Page
Loading...
