Chapter 4 Tutorials
VMG4927-B50A / VMG9827-B50A / VMG3927-B50B User’s Guide
45
Try to connect to a website to see if you have correctly set up your Internet connection. Be sure to
contact your service provider for any information you need to configure the WAN screens.
4.3 Set Up a Secure WiFi Network
Thomas wants to set up a WiFi network so that he can use his notebook to access the Internet. In this WiFi
network, the VMG serves as an access point (AP), and the notebook is the WiFi client. The WiFi client can
access the Internet through the AP.
Thomas has to configure the WiFi network settings on the VMG. Then he can set up a WiFi network using
WPS (Section 4.3.3 on page 49) or manual configuration (Section 4.3.3 on page 49).
4.3.1 Configure the WiFi Network Settings
This example uses the following parameters to set up a 2.4G WiFi network.
1 Click Network Setting > Wireless > WiFi and click the Edit button. Note that you may see one or two
network name(s) displayed on this screen depending on whether you have selected Keep 2.4G and 5G
WiFi network name the same.
WiFi Network Name Example
WiFi Enable
WiFi Security Type WPA2-PSK
WiFi Password DoNotStealMyWirelessNetwork
802.11 Mode 802.11b/g/n Mixed
To Next Page
Loading...
