Chapter 9 Routing
VMG4927-B50A / VMG9827-B50A / VMG3927-B50B User’s Guide
136
Figure 66 Network Setting > Routing > DNS Route
The following table describes the labels in this screen.
9.3.1 DNS Route Add
You can manually add the VMG’s DNS route entry. Click Add New DNS Route in the Network Setting >
Routing > DNS Route screen. The screen shown next appears.
Figure 67 DNS Route Add
The following table describes the labels in this screen.
Table 37 Network Setting > Routing > DNS Route
LABEL DESCRIPTION
Add New DNS
Route
Click this to add a new DNS route.
# This is the index number of a DNS route.
Status This field displays whether the DNS route is active or not. A yellow bulb signifies that this DNS route
is active. A gray bulb signifies that this DNS route is not active.
Domain Name This is the host name or domain name of the DNS route entry.
WAN Interface This is the WAN connection through which the VMG forwards DNS requests for this domain name.
Subnet Mask This is the subnet mask of the DNS route entry.
Modify Click the Edit icon to modify the DNS route.
Click the Delete icon to delete the DNS route.
Table 38 DNS Route Add
LABEL DESCRIPTION
Active Select to enable or disable this DNS route.
Domain Name Enter the domain name of the DNS route entry.
To Next Page
Loading...
