Chapter 4 Tutorials
VMG4927-B50A / VMG9827-B50A / VMG3927-B50B User’s Guide
47
Thomas can now use the WPS feature to establish a WiFi connection between his notebook and the
VMG (see Section 4.3.2 on page 47). He can also use the notebook’s WiFi client to search for the VMG
(see Section 4.3.3 on page 49).
4.3.2 Use WPS
This section shows you how to set up a WiFi network using WPS. It uses the VMG as the AP and a WPS-
enabled Android smartphone as the WiFi client.
To set up the WiFi client settings:
1 Make sure that your VMG is turned on and your Android smartphone is within the cover range of the WiFi
signal.
2 Make sure WPS is enabled on the VMG. You can check it by logging into the VMG’s Web Configurator
and see if it is enabled in the Network Setting > Wireless > Advanced screen. If not, select the WPS check
box for the 2.4G or 5G wireless network and then click Apply.
Note: When the MESH function is enabled (see Section 7.7 on page 103), the VMG
automatically enables WPS and grays the field out on this
Network Setting > Wireless >
Advanced
screen.
To Next Page
Loading...
