Chapter 6 Broadband
VMG4927-B50A / VMG9827-B50A / VMG3927-B50B User’s Guide
85
Click Network Setting > Broadband > Advanced to display the following screen.
Figure 33 Network Setting > Broadband > Advanced
The following table describes the labels in this screen.
30a 30 3479 8.625 14.5 200
35b 35.328 8192 4.3125 17.0 300
Table 16 Network Setting > Broadband > Advanced
LABEL DESCRIPTION
DSL Capabilities
PhyR US Enable or disable PhyR US (upstream) for upstream transmission to the WAN. PhyR US should be
enabled if data being transmitted upstream is sensitive to noise. However, enabling PhyR US can
decrease the US line rate. Enabling or disabling PhyR will require the CPE to retrain. For PhyR to
function, the DSLAM must also support PhyR and have it enabled.
PhyR DS Enable or disable PhyR DS (downstream) for downstream transmission from the WAN. PhyR DS
should be enabled if data being transmitted downstream is sensitive to noise. However,
enabling PhyR DS can decrease the DS line rate. Enabling or disabling PhyR will require the CPE
to retrain. For PhyR to function, the DSLAM must also support PhyR and have it enabled.
Table 15 VDSL Profiles (continued)
PROFILE
BANDWIDTH
(MHZ)
NUMBER OF
DOWNSTREAM
CARRIERS
CARRIER
BANDWIDTH
(KHZ)
POWER (DBM)
MAX.
DOWNSTREAM
THROUGHPUT
(MBIT/S)
To Next Page
Loading...
