XGS1930 Series User’s Guide
130
CHAPTER 10
Static MAC Forwarding
10.1 Overview
This chapter discusses how to configure forwarding rules based on MAC addresses of devices on your
network.
Use these screens to configure static MAC address forwarding.
10.1.1 What You Can Do
Use the Static MAC Forwarding screen (Section 10.2 on page 130) to assign static MAC addresses for a
port.
10.2 Configure Static MAC Forwarding
A static MAC address is an address that has been manually entered in the MAC address table. Static
MAC addresses do not age out. When you set up static MAC address rules, you are setting static MAC
addresses for a port. This may reduce the need for broadcasting.
Static MAC address forwarding together with port security allow only computers in the MAC address
table on a port to access the Switch.
Click Advanced Application > Static MAC Forwarding in the navigation panel to display the
configuration screen as shown.
Figure 99 Advanced Application > Static MAC Forwarding
To Next Page
Loading...
