XGS1930 Series User’s Guide
188
Figure 138 Advanced Application > Policy Rule
The following table describes the labels in this screen.
Table 87 Advanced Application > Policy Rule
LABEL DESCRIPTION
Active Select this option to enable the policy.
Name Enter a descriptive name for identification purposes.
Classifier(s) This field displays the active classifiers you configure in the Classifier screen.
Select the classifiers to which this policy rule applies. To select more than one classifier, press
[SHIFT] and select the choices at the same time.
Parameters
Set the fields below for this policy. You only have to set the fields that is related to the actions you configure in the
Action field.
General
VLAN ID Specify a VLAN ID.
Egress Port Type the number of an outgoing port.
Priority Specify a priority level.
Rate Limit You can configure the desired bandwidth available to a traffic flow. Traffic that exceeds the
maximum bandwidth allocated (in cases where the network is congested) is called out-of-profile
traffic.
Bandwidth Specify the bandwidth in kilobit per second (kbps). Enter a number between 1 and 1000000.
To Next Page
Loading...
