Chapter 30 Error-Disable
XGS1930 Series User’s Guide
242
Interval Enter the number of seconds (from 30 to 2592000) for the time interval.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 118 Advanced Application > Errdisable > Errdisable Recovery (continued)
LABEL DESCRIPTION
To Next Page
Loading...
