ZyXEL Communications XGS1930-28 - Page 38

Chapter 3 Hardware Panels
XGS1930 Series User’s Guide
38
PoE MAX
(XGS1930-28HP
and XGS1930-
52HP)
Bar1 is the bar at
the bottom; bar
5 is the bar at
the top.
Green
(Bar1-Bar3)
On Each bar represents 20% of PoE Power consumption.
Bar 1: PoE power usage is below 20 percent of the power supplied budget.
Bar 2: PoE power usage is below 40 percent of the power supplied budget,
but over 20 percent of the power supplied budget.
Bar 3: PoE power usage is below 60 percent of the power supplied budget,
but over 40 percent of the power supplied budget.
Yellow
(Bar4)
On PoE power usage is below 80 percent of the power supplied budget, but
over 60 percent of the power supplied budget.
Red
(Bar5)
On PoE power usage is more than 80 percent of the power supplied budget.
Blinking Less than 5 percent of the power supplied budget remains. 5 percent is the
default value.
Off PoE power usage is 0 percent of the power supplied budget.
10/100/1000Base-T Ports
LNK/ACT (Left)
1 – 24 (XGS1930-
28)
1 – 48 (XGS1930-
52)
Green On The link to a 1000 Mbps Ethernet network is up.
Blinking The Switch is transmitting or receiving to or from a 1000 Mbps Ethernet
network.
Amber On The link to a 10 Mbps or a 100 Mbps Ethernet network is up.
Blinking The Switch is transmitting or receiving to or from a 10 Mbps or a 100 Mbps
Ethernet network.
Off The link to an Ethernet network is down.
PoE 10/100/1000Base-T Ports
LNK/ACT (Left)
1 – 24 (XGS1930-
28HP)
1 – 48 (XGS1930-
52HP)
Green On The link to a 1000 Mbps Ethernet network is up.
Blinking The Switch is transmitting or receiving to or from a 1000 Mbps Ethernet
network.
Amber On The link to a 10 Mbps or a 100 Mbps Ethernet network is up.
Blinking The Switch is transmitting or receiving to or from a 10 Mbps or a 100 Mbps
Ethernet network.
Off The link to an Ethernet network is down.
PoE (Right)
1 – 24 (XGS1930-
28HP)
1 – 48 (XGS1930-
52HP)
Green On Power supplied to all PoE Ethernet ports meets the IEEE 802.3at standard.
Amber On Power supplied to all PoE Ethernet ports meets the IEEE 802.3af standard.
Off There is no power supplied.
1G/10G SFP+ Slots
LNK/ACT
25 – 28
(XGS1930-28
and XGS1930-
28HP)
49 – 52
(XGS1930-52
and XGS1930-
52HP)
Green On The port has a successful 1000 Mbps connection.
Blinking The port is transmitting or receiving data at 1000 Mbps.
Blue On The port has a successful 10 Gbps connection.
Blinking The port is transmitting or receiving data at 10 Gbps.
Off This link is disconnected.
Table 4 LED Descriptions (continued)
LED COLOR STATUS DESCRIPTION