XGS2210 Series User’s Guide
20
CHAPTER 1
Getting to Know Your Switch
1.1 Introduction
This chapter introduces the main features and applications of the Switch. The XGS2210 Series consists of
the following models:
• XGS2210-28
• XGS2210-28HP
• XGS2210-52
• XGS2210-52HP
Referring to PoE model(s) in this User's Guide only applies to XGS2210-28HP and XGS2210-52HP.
The Switch is a stackable, layer-2, Gigabit Ethernet (GbE) switch with one power slot for single power
supply. The Switch provides four SFP+ slots for uplink. By integrating router functions, the Switch performs
wire-speed layer-3 routing in addition to layer-2 switching.
With its built-in web configurator, including the Zyxel One Network (ZON) Neighbor Management feature
(Section 7.4 on page 61), viewing, managing and configuring the Switch and its neighboring devices is
easy. The Switch can also be managed via Telnet, any terminal emulator program on the console port,
or third-party SNMP management.
In addition, Zyxel offers a proprietary software program called Zyxel One Network (ZON) Utility, it is a
utility tool that assists you to set up and maintain network devices in a more simple and efficient way.
You can download the ZON Utility at www.zyxel.com and install it on a PC. For more information on ZON
Utility see Section 7.3 on page 60.
The following table describes the port features of the Switch by model.
The following table shows which firmware version supports ZON and Smart Connect for each Switch. The
firmware on each Switch is identified by the firmware trunk version, followed by a unique model code
and release number in brackets. For example, 4.30(AAZJ.0) is a firmware version for XGS2210-28 where
Table 1 Models and Port Features
SWITCH MODEL PORT FEATURES
XGS2210-28 and XGS2210-
28HP
• 24 100/1000 Mbps Ethernet ports
•4 SFP+ interfaces
XGS2210-52 and XGS2210-
52HP
• 48 100/1000 Mbps Ethernet ports
•4 SFP+ interfaces
To Next Page
Loading...
