Chapter 8 Basic Setting
XGS2210 Series User’s Guide
72
Note: You must configure a VLAN first. Each VLAN can have multiple management IP
addresses, and you can log into the Switch via different management IP addresses
simultaneously.
Figure 50 Basic Setting > IP Setup
The following table describes the labels in this screen.
8.6.2 IP Status Details
Use this screen to view IP status details. Click a number in the Index column in the IP Status screen to
display the screen as shown next.
Figure 51 Basic Setting > IP Setup > IP Status Details: Static
The following table describes the labels in this screen.
Table 15 Basic Setting > IP Setup
LABEL DESCRIPTION
Index This field displays the index number of an entry.
IP Address This field displays IP address of the Switch in the IP domain.
IP Subnet Mask This field displays the subnet mask of the Switch in the IP domain.
VID This field displays the VLAN identification number of the IP domain on the Switch.
Type This shows whether this IP address is dynamically assigned from a DHCP server or manually
assigned (Static).
Renew Click this to renew the dynamic IP address.
Release Click this to release the dynamic IP address.
Table 16 Basic Setting > IP Setup > IP Status Details: Static
LABEL DESCRIPTION
Type This shows whether this IP address is dynamically assigned from a DHCP server or manually
assigned (Static or DHCP).
VID This is the VLAN identification number to which an IP routing domain belongs.
IP Address This is the IP address of your Switch in dotted decimal notation for example 192.168.1.1.
IP Subnet Mask This is the IP subnet mask of your Switch in dotted decimal notation for example 255.255.255.0.
To Next Page
Loading...
