ZyXEL Communications ZyWall 110 - IP;MAC Binding Exempt List

Chapter 17 IP/MAC Binding
ZyWALL USG Series User’s Guide
478
Figure 341 Configuration > Network > IP/MAC Binding > Edit > Add
The following table describes the labels in this screen.
17.3 IP/MAC Binding Exempt List
Click Configuration > Network > IP/MAC Binding > Exempt List to open the IP/MAC Binding Exempt List
screen. Use this screen to configure ranges of IP addresses to which the Zyxel Device does not apply IP/
MAC binding.
Figure 342 Configuration > Network > IP/MAC Binding > Exempt List
The following table describes the labels in this screen.
Table 162 Configuration > Network > IP/MAC Binding > Edit > Add
LABEL DESCRIPTION
Interface Name This field displays the name of the interface within the Zyxel Device and the interface’s IP
address and subnet mask.
IP Address Enter the IP address that the Zyxel Device is to assign to a device with the entry’s MAC
address.
MAC Address Enter the MAC address of the device to which the Zyxel Device assigns the entry’s IP
address.
Description Enter up to 64 printable ASCII characters to help identify the entry. For example, you may
want to list the computer’s owner.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving.
Table 163 Configuration > Network > IP/MAC Binding > Exempt List
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Click an entry or select it and click Edit to modify the entry’s settings.