Chapter 43 Object
ZyWALL USG Series User’s Guide
836
The Application screen allows you to create application objects consisting of service signatures as well
as view license and signature information. To access this screen click Configuration > Object >
Application > Application.
Figure 576 Configuration > Object > Application > Application
The following table describes the labels in this screen.
Table 317 Configuration > Object > Application > Application
LABEL DESCRIPTION
Configuration
Add Click this to add a new application object.
Edit Click this to edit the selected application object.
Remove Click this to remove the selected application object.
References Click this to view which other objects are linked to the selected application object.
Clone Use Clone to create a new entry by modifying an existing one.
• Select an existing entry.
•Click Clone.
• A configuration copy of the selected entry pops up. You must at least change the name as
duplicate entry names are not allowed.
# This field is a sequential value associated with an application object.
Name This field indicates the name assigned to the application object.
Description This field shows some extra information on the application object.
Content This field shows the application signature(s) in this application object.
Reference This displays the number of times an object reference is used in a profile.
License You need to buy a license or use a trial license in order to use IDP/AppPatrol signatures. These
fields show license-related information.
License Status This field shows whether you have activated an IDP/AppPatrol signatures license
License Type This field shows the type of IDP/AppPatrol signatures license you have activated
Signature
Information
An activated license allows you to download signatures to the Zyxel Device from myZyxel.
These fields show details on the signatures downloaded.
Current
Version
The version number increments when signatures are updated at myZyxel. This field shows the
current version downloaded to the Zyxel Device.