Chapter 43 Object
ZyWALL USG Series User’s Guide
900
The following table describes the labels in this screen.
43.14.2.1 Creating/Editing an SSL Application Object
You can create a web-based application that allows remote users to access an application via
standard web browsers. You can also create a file sharing application that specify the name of a folder
on a file server (Linux or Windows) which remote users can access. Remote users can access files using a
standard web browser and files are displayed as links on the screen.
To configure an SSL application, click the Add or Edit button in the SSL Application screen and select
Web Application or File Sharing in the Type field. The screen differs depending on what object type you
choose.
Note: If you are creating a file sharing SSL application, you must also configure the shared
folder on the file server for remote access. Refer to the document that comes with your
file server.
Figure 627 Configuration > Object > SSL Application > Add/Edit: Web Application
Table 356 Configuration > Object > SSL Application
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove it
before doing so.
References Select an entry and click References to open a screen that shows which settings use the entry.
# This field displays the index number.
Name This field displays the name of the object.
Address This field displays the IP address/URL of the application server or the location of a file share.
Type This field shows whether the object is a file-sharing, web-server, Outlook Web Access, Virtual Network
Computing, or Remote Desktop Protocol SSL application.
To Next Page
Loading...
