EasyManuals Logo

2gig Technologies GO!control 2GIG-CNTRL2 Operation And User's Guide

2gig Technologies GO!control 2GIG-CNTRL2
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
19
Fire Protection
This equipment should be installed in accordance with Chapter 2 of the National Fire Alarm Code,
ANSI/NFPA 72, (National Fire Protection Association, Batterymarch Park, Quincy, MA 02269). Printed
information describing proper installation, operation, testing, maintenance, evacuation planning, and
repair service is to be provided with this equipment.
Recommended Smoke Detector Locations
The National Fire Protection Association’s (NFPA) Standard #72 recommends the following placement
for smoke detectors:
Early warning fi re detection is best achieved by the installation of fi re detection equipment
in all rooms and areas of the household. The equipment should be installed as follows:
A smoke detector installed outside each separate sleeping area, in the immediate
vicinity of the bedrooms and on each additional story of the family living unit,
including basements and excluding crawl spaces and unfi nished attics.
In addition, the NFPA recommends that you install smoke detectors in the
living room, dining room, bedroom(s), kitchen, hallway(s), fi nished attics,
furnace room, utility and storage rooms, and attached garages.

Table of Contents

Other manuals for 2gig Technologies GO!control 2GIG-CNTRL2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the 2gig Technologies GO!control 2GIG-CNTRL2 and is the answer not in the manual?

2gig Technologies GO!control 2GIG-CNTRL2 Specifications

General IconGeneral
Brand2gig Technologies
ModelGO!control 2GIG-CNTRL2
CategorySecurity System
LanguageEnglish

Related product manuals