37
Set Date and Time
The Control Panel has a built-in clock and calendar. The time and date are displayed on the Home
Screen. The time and date are also used for the system history and event logs that store data on
system events. The installer can set the system to automatically adjust for daylight saving time if it’s
observed in your location.
✓ NOTE: If the cellular radio module is installed in the Control Panel, the time and date will
be automatically set through the cellular radio by the Central Monitoring Station.
To set the date and time, use the following
steps:
On the Home Screen, press 1. SECURITY.
On the Security Screen, press 2. MENU.
On the Menu Screen, press 3. TOOLBOX.
On Toolbox Screen (1 of 3), 4.
press the → arrow.
On the Toolbox Screen (2 of 3), 5.
press SET DATE / TIME.
Use the 6. ↑ and ↓ arrows to
set the current month, day,
and year. Press NEXT.
Use the 7. ↑ and ↓ arrows to
set the hours, minutes, and
AM or PM. Press OK.
A confi rmation screen showing 8.
the date and time set will be
displayed. Press OK.
Display Version
The versions of the “fi rmware” installed in various parts of the system can be displayed for testing
or troubleshooting by your installer.
To display the fi rmware versions, use the
following steps:
On the Home Screen, press 1. SECURITY.
On the Security Screen, press 2. MENU.
On the Menu Screen, press 3. TOOLBOX.
On Toolbox Screen (1 of 3), 4.
press the → arrow.
On the Toolbox Screen 5.
(2 of 3), press VERSION.
Use the 6. ↑ and ↓ arrows to
scroll through the list. Press
BACK when fi nished.
System Toolbox
Set Date Screen
Set Time Screen
Firmware Version Display
To Next Page
Loading...
Need help?
General
