2gig Technologies GO!control 2GIG-CNTRL2 User Manual

16
Key Fob Arming and Disarming
Your system may be equipped with one or more wireless key fobs. Up
to eight key fobs can be used to control the system remotely. Each key
fob has four buttons and can perform fi ve functions. A User Code is not
required when arming or disarming the system with a wireless key fob.
There are several key fob options that can be set by the installer. See
the Installer Set Options section at the rear of this manual.
Key Fob Arming to Stay Mode
• To arm the system to Stay Mode using a key fob, press the (STAY) button.
✓ NOTE: Depending setup options, if there are open perimeter doors or windows, the system
may not allow arming to Stay Mode with a wireless key fob (See Installer Set Options).
Key Fob Arming to Away Mode
• To arm the system to Away Mode using a key fob, press the (AWAY) button.
✓ NOTE: Depending setup options, if there are open perimeter doors or windows, the system
may not allow arming to Away Mode with a wireless key fob (See Installer Set Options).
Key Fob Disarming
• To disarm the system from Stay or Away Mode using a key fob, press the
(DISARM) button. (This option must be enabled by the installer.)
Key Fob Emergency
• To trigger an emergency alarm using a key fob, press the (AWAY) and (DISARM)
buttons at the same time for fi ve seconds. (This option must be enabled by the installer.)
✓ NOTE: If an emergency alarm is triggered by a key fob, it cannot be stopped using a key fob
(DISARM) button. The alarm must be canceled at the Control Panel.
Key Fob Auxiliary
• To trigger the Control Panel’s auxiliary output, press the (AUXILIARY) button.
• If this feature is used, your auxiliary output controls: _______________________________
Burglary Protection

2gig Technologies GO!control 2GIG-CNTRL2 Specifications

General

Brand	2gig Technologies
Model	GO!control 2GIG-CNTRL2
Category	Security System
Language	English