26
Remote Control by Telephone
Telephone Remote
The system can be controlled remotely using a standard telephone. Remote control is performed
by calling the system and responding to spoken questions from the system. By pressing certain
telephone keys, you can arm and disarm the system, bypass sensors, and query the system status.
✓ NOTE: The telephone remote control system feature is optional. It must be enabled by
your installer before it can be used.
Calling the System
Your installer selects whether your system supports the remote telephone option or not. If this
feature is enabled, the system will require calling it twice within 30 seconds to answer your call
and connect.
1. Call the telephone number that the Control Panel is connected to. Wait for one or two rings,
then hang up.
2. Within 10-45 seconds, call the Control Panel again. The Control Panel will answer the
telephone.
To Next Page
Loading...
