25
Reading Confi dential Messages
When a confi dential message is sent to the Control Panel, only users with the Master User Code can
display the message.
Use the following steps for confi dential messages:
1. Press the message line on the
message list. If the message is a
confi dential message, the code
entry screen will be displayed.
2. Enter the Master User Code on the
code entry screen. Regular User
Codes will not be accepted.
3. View the displayed message.
4. Proceed to save or delete the message
as detailed in the previous section.
Filtering Messages
To select which type of messages will be displayed
on the message list, use the message fi lters.
1. Press FILTERS to display the
message fi lter option screen.
2. Check or un-check the types of
messages to display. Press ALL
to check all types. Press BACK
to return to the message list.
The fi lters will reset, selecting all types, when
your message reviewing is over and the system
returns to the Security Screen.
Sorting Messages
To select the order in which messages are
displayed on the message list, use the message
sorting options.
1. Press SORTS to display the
message sorting option screen.
2. Pick an option to sort the
messages by date received, date
expired, or alphabetically.
3. Check the REVERSE box to reverse
the display order. Check the PRIORITY
box to list urgent messages fi rst.
4. Press BACK to return to
the message list.
The sort options will reset when the message
reviewing session is over.
Messaging
Code Entry Screen for Confi dential Messages
Confi dential Message
Message Filter Screen
Message Sort Screen
Message List
Press
Here
To Next Page
Loading...
Need help?
General
