2N EasyGate User Manual

7
 The called subscriber has hung up (disconnection).
Dialing end signaling:
• Dialing reception has been terminated. Connection is being established.
PIN tone:
• Enter the PIN code.
• This tone is transmitted upon power up if the PIN has to be entered manually.
PUK tone:
• Enter the PUK code.
• This tone is transmitted upon repeated wrong PIN entering attempts. SIM card is
blocked.
3.2.2. Programming Mode Tones
Tones confirming/refusing the values entered are transmitted during telephone line
based programming. Each tone has a different melody.
Confirmation:
• Confirms that the service password or parameter number entered is correct and
has been accepted.
Refusal:
• Incorrect parameter number;
• Incorrect parameter value
• Transmitted when a parameter is cancelled with a .
Saving:
• Parameter value entered is correct and has been saved.

2N EasyGate Specifications

General

Device type	Cellular network gateway
Market positioning	Business
Data network	GPRS, GSM
GSM bands supported	850, 900, 1800, 1900 MHz
GPRS multislot class	10
Input voltage	12 V
Operating temperature (T-T)	0 - 45 °C

Weight and Dimensions

Dimensions (WxDxH)	170 x 130 x 45 mm