2N IP Force 9151101W - Maintenance

Installation manual 2N® IP Force

106 / 118
•
•
•
•
•
•
•
•
•
Answering and Rejecting Incoming Calls
If the automatic incoming call answering function is off,2N
®
IP Forcesignals
an incoming call with loud ringing. Push the button to answer the call and
the to reject the call. This function is available in models equipped with a
numerical keypad only.
Door Opening (Switch Activation) by Code
2N
®
IP Forceis equipped with a door lock opening switch. Enter the valid
code using your numerical keypad to activate the switch.
Procedure:
Enter the numerical switch activating code using the numerical keypad and press for confirmation.
A successful entering of a valid code is signalled by a continuous tone indicating unlocking (switch
activation). An invalid code is signalled acoustically by .
Profile Activation and Deactivation
Activate/deactivate a profile using the numerical keypad in order to define
call routing to the telephone directory numbers more specifically.
Procedure:
Enter the numerical profile activating/deactivating code and press for confirmation.
A successful entering of a valid code is signalled acoustically by ( for profile) for activation, or
( for profile) for deactivation. An invalid code is signalled acoustically by .
3.3 Maintenance
Cleaning
If used frequenly, the device surface, the keypad in particular, gets dirty.To
clean it, use a piece of soft cloth moistened with clean water. We recommend
you to follow these principles while cleaning:
Never use aggressive detergents (such as abrasives or strong disinfectants).
Use suitable cleaning agents for glass lens cleaning (cleaners for glasses, optic devices screens, etc.).
Alcohol-based cleaners may be applied.
Clean the device in dry weather in order to make waste water evaporate quickly.
We recommend using cleaning wipes designed for IT / electronic items.