Installation manual 2N® IP Force
•
•
1. Product Overview
Here is what you can find in this section:
1.1 Components and Associated Products
1.2 Terms and Symbols
Basic Features
2N
®
IP Forceis a highly resistant and reliable IP door access intercom
provided with a lot of useful above-standard functions. Supporting the SIP
standard and being compatible with the leading IP PBX and telephone
suppliers,2N
®
IP Forcecan make use of all VoIP services.2N
®
IP Forcecan
work as a standard or emergency door access intercom for buildings,
entrances to premises or garages, manufacturing halls, highways and so on.
2N
®
IP Forceis equipped with two very sensitive microphones and an up to
10W loudspeaker. Thanks to an integrated acoustic echo cancelling (AEC)
system, the product provides mutual audibility even of persons talking at the
same time under normal conditions.
2N
®
IP Forcecan be equipped with a colour wide-angle camera, which
displays the calling person on the called party's video telephone or PC
monitor.
2N
®
IP Forcecan be provided with 1, 2 or 4 pre-programmed buttons. You
can set up to three telephone numbers and time profiles for each of the
buttons to increase the accessibility of the called party.
2N
®
IP Forcecan be equipped with a numerical keypad to be used as a code
lock for lock switch activating or telephone/subscriber number dialling.
2N
®
IP Forceis equipped with an electric lock switch. You can control the
switch using a numerical keypad or, during a call, using any telephone set. An
additional switch module can be installed if necessary. A wide range of
settings allow for a variety of applications.
2N
®
IP Forcecan also be provided with RFID card reader modules.
To Next Page
Loading...
