2N IP Force 9151101W - Page 93

Installation manual 2N® IP Force

93 / 118
•
•
•
•
•
•
Connection of the2NIPintercoms Card Readerto a security system unit is a
typical example ofapplication.

Function:
The2N
®
Wiegand Isolatorseparates galvanically a two-wire Wiegand bus in
onedirection and a status LED signal in the other direction. The module is
power supplied from theWiegand bus receiver side.

Specifications:
2-wire WIEGAND IN
2-wire WIEGAND OUT
LED IN switched against GND on WIEGAND OUT side
Open LED OUT switched against GND on WIEGAND IN side (up to 24 V / 50 mA)
5 to 16 V / 10 mA power supply from Wiegand bus receiver side
500 V DC isolation strength