3Com 3500 - Page 21

18
Feature Feature Code Entry Description
<destination>
extension becomes available. See
Camping on a Busy Extension.
Class of Service
(COS)
Override
Feature + 6 + 433, then <your
extension>,
then <your mailbox password>+ #,
then
<outside party number>
See Class of Service Override.
Customer Accounting
and Billing Code
Feature + 6 + 777, then <your
customer accounting and billing
code>+ #, then <outside party
number>
See Customer Accounting and Billing Code.
Conference Call
Feature + 6 + 430, then
<destination>, then Feature + 6 +
430
See Setting up a Conference Call.
Drop the conference
Feature + 6 + 431, then
<destination>, then Feature + 6 +
431
See Setting up a Conference Call.
Display Software
Version
Feature + 6 + 837
Displays the current version of VCX software
running on the phone.
Do Not Disturb
(Enable/Disable)
Feature + 6 + 446
Or
*446
See Activating Do Not Disturb.
Forced Account
Code
Feature + 6 + 888, then <your
forced account code>+ #, then
<outside party number>
See Forced Account Code.
Hands Free Feature + 6 + 100
Enables or disable the Hands-Free feature.
See Using the Hands Free Feature.
Hold Feature + 6 + 402 See Putting a Call on Hold.
Hunt Group/ACD
Group or Broadcast
Group Login/Logout
Feature + 6 + 971, then <hunt group
number/ACD group number>
Or
*971*<hunt group number/ACD
group number >
See Hunt Groups and ACD Groups.
ACD Group Status Feature + 6 + 973
See ACD Groups
.
Override Wrap Up Feature + 6 + 974
See ACD Groups
.
Extend Wrap Up Feature + 6 + 975
See ACD Groups
.
Login/Logout (phone) Feature + 6 + 128
Malicious Call Trace Feature + 6 + 119
Logs and sends notifications when entered
during a call. See Activating Malicious Call
Trace.
Mute Feature + 6 + 101 See Muting Calls.
Mute Ringer Feature + 6 + 489 See Mute Ringer.
OK Feature + 6 + 120
Displays OK in the Display Panel. Used to
make a call without waiting for the call
completion time-out value to expire.
Password Stored
Locally
Feature + 6 + 434, then <current
password>
Stores the password you use to log in to your
telephone on the telephone (locally). If you
use the VCX User Interface to change your
password, use this feature code to set the
password stored on the phone, thus
synchronizing the passwords. See VCX User
Interface online help for more information.
Redial Feature + 6 + 401 See Redialing a Call.