3Com 3500 - Dialing Personal Speed Dial Numbers; Dialing System Speed Dial Numbers

47
2 To change or delete an existing speed dial number, press the Change button and then
the Delete button to delete each digit.
3 To store the number, press Enter.
Dialing Personal Speed Dial Numbers
The method you use to dial a configured speed dial number depends on your telephone
and whether or not the number is mapped to a speed dial Access button.
To dial a number configured as a speed dial on a VCX telephone with one or more
speed dial Access buttons, press the appropriate button. If the number is not associated
with a button, use the next procedure.
To dial a configured speed dial number on any VCX phone:
1 Pick up the handset. Or press the Speaker button.
2 Press Feature.
3 Enter the feature code associated with the number you want to dial.
For example, if the number you want to speed dial is mapped to Speed dial 2, enter the
following through the Telephone User Interface:
Feature + 6 + 601 + 2
Alternatively, you can skip pressing the Feature button and enter:
*601 *2
Note that, with this syntax, you cannot enter *602.
You can also use the following method to dial a speed dial number on any VCX phone:
4 Press the Program and then the select button.
The Display Panel lists the first speed dial, for example:
1: 1001
Use the up and down scroll buttons to locate the speed dial number you want to dial.
5 Press the first soft button under the Display Panel.
Your telephone dials the number.
To exit the speed dial list in the Display Panel, press the Back button.
In addition to using the Program menu to list personal speed dial numbers, you can
view the personal speed dial numbers configured on your telephone by entering
Feature + 463.
Dialing System Speed Dial Numbers
The administrator can set up system-wide speed dials for numbers that are dialed
frequently by many internal users. You can view the system-wide speed dial list through
the VCX User Interface (see Chapter 6 for information) or you can view and dial
numbers from it using the telephone display panel.
To use a system speed dial number: