5-6
display version
Syntax
display version
View
User view
Parameter
None
Description
Use the display version command to display the system information (such as the version information)
about the switch.
Example
# Display the system information about the switch.
<Command-Line> display version
ip address
Syntax
ip address ip-address net-mask
undo ip address
View
User view
Parameter
ip-address: IP address to be assigned to the switch.
net-mask: Mask of the IP address to be assigned to the management VLAN interface. The mask length
is expressed as dotted decimal notation or integer in the range of 0 to 32.
Description
Use the ip address command to assign an static IP address (and mask) to the switch.
Use the undo ip address command to remove the static IP address.
Example
# Assign a static IP address (and the mask) to the switch.
<Command-Line> ip address 192.168.0.234 255.255.255.0
ip address dhcp-alloc
Syntax
ip address dhcp-alloc
To Next Page
Loading...
