5-8
Parameter
name: Web user name, which ranges from 1 to 8.
password: Web user password, which ranges from 1 to 8.
level: Web user level, which ranges from 0 to 1.0 is guest, 1 is admin.
Description
Use the localuser command to configure a Web user for the switch.
Use the undo localuser command to remove the Web user.
Example
# Configure a Web admin user for the switch.
<Command-Line> localuser test test 1
management-vlan
Syntax
management-vlan vlan-id
undo management-vlan
View
User view
Parameter
vlan-id: VLAN ID, in the range of 1 to 4094.
Description
Use the management-vlan command to configure a VLAN as the management VLAN of the switch.
Use the undo management vlan command to restore the default management VLAN.
By default, VLAN 1 operates as the management VLAN of the switch.
Example
# Configure VLAN 10 as the management VLAN of the switch, and view the configuration result.
<Command-Line> management-vlan 10
<Command-Line> display management-vlan
VLAN ID: 2
IP Address: 192.168.0.241
Subnet Mask: 255.255.255.0
Tagged Ports: none
Untagged Ports: none
management-vlan port
Syntax
management-vlan port ethernet interface-number [ to ethernet interface-number ]
To Next Page
Loading...
