3Com 3CBLSF26PWRH - Quit; Reboot

5-10
Example
# Check the reachability of the host with IP address 192.168.0.100.
<Command-Line> ping 192.168.0.100
PING 192.168.0.100: 56 data bytes, press CTRL_C to break
Reply from 192.168.0.100 : bytes=56 sequence=1 ttl=255 time = 1ms
Reply from 192.168.0.100 : bytes=56 sequence=2 ttl=255 time = 2ms
Reply from 192.168.0.100 : bytes=56 sequence=3 ttl=255 time = 1ms
Reply from 192.168.0.100 : bytes=56 sequence=4 ttl=255 time = 3ms
Reply from 192.168.0.100 : bytes=56 sequence=5 ttl=255 time = 2ms
--- 192.168.0.100 ping statistics ---
5 packet transmitted
5 packet received
0% packet loss
round-trip min/avg/max = 1/2/3 ms
quit
Syntax
quit
View
User view
Parameter
None
Description
Use the quit command to exit the system.
Example
# Exit the system.
<Command-Line> quit
User interface Aux0/0 is available
Please press ENTER.
reboot
Syntax
reboot
View
User view