3Com 3CBLSF26PWRH - Restore; Save

5-11
Parameter
None
Description
Use the reboot command to restart the switch.
Example
# Restart the switch.
<Command-Line> reboot
This will reboot device. Continue? [Y/N]
restore
Syntax
restore default
View
User view
Parameter
None
Description
Use the restore command to reset the switch to factory defaults.
Example
# Reset the switch to factory defaults.
<Command-Line> restore default
This will restore the default configuration in the FLASH memory
Are you sure?[Y/N]
save
Syntax
save
View
User view
Parameter
None
Description
Use the save command to save current configuration of the switch.