3-30
network segment. All other ports are blocked, which means that they are prevented from forwarding
traffic.
The device supports the following STP versions:
z Classic STP: Provides a single path between end stations, avoiding and eliminating loops.
z Rapid STP: Detects and uses network topologies that provide faster convergence of the spanning
tree, without creating forwarding loops. While Classic STP prevents Layer 2 forwarding loops in a
general network topology, convergence can take between 30-60 seconds.
This section contains the following topics:
z Defining STP Global Parameters
z Modifying STP Interface Parameters
z Viewing STP
Defining STP Global Parameters
The STP Global Setup Page allows network managers to assign STP global settings.
Click Device > Spanning Tree > Setup. The STP Global Setup Page opens.
Figure 3-34 STP Global Setup Page
The STP Global Setup Page contains the following fields:
To Next Page
Loading...
