3Com 4210 - Page 17

Switch 4210 V3.01.09 Release Notes
February 27, 2009 Page 17 of 43
Version number Item Description
remove the setting.
After execution of this command, the system
automatically transforms the public key file into
PKCS format, and imports the peer public key.
This requires that you get a copy of the public key
file from the peer through FTP/TFTP.
Example:
# Transform the format of client public key file abc
and configure a public key named 123.
[4210] rsa peer-public-key 123 import sshkey abc
Removed commands None
Modified commands None
V3.01.03
New commands
Command 1
Syntax:
display mac-address multicast [ static
[ { {
mac-address vlan vlan-id | vlan vlan-id }
[
count ] } | count ] ]
View: Any view
Parameter:
static: Displays static multicast MAC address
entries.
mac-address
vlan vlan-id: Displays multicast
MAC address entry/entries in the specified VLAN.
count: Displays the number of MAC entries.
vlan-id: ID of the specific VLAN.
Description:
Use the display mac-address multicast command
to display the multicast MAC address entry/entries
manually configured on the switch.
Executing this command with neither mac-address
vlan vlan-id nor vlan vlan-id will display the
information about all the multicast MAC address
entries manually added on the switch, including
the multicast MAC address, VLAN ID, state of the
MAC address, port number and aging time.
Executing this command with vlan vlan-id but
without mac-address will display the information
about all the multicast MAC address entries
manually added in the specified VLAN, including
the multicast MAC address, VLAN ID, state of the
MAC address, port number and aging time.
Executing this command with both mac-address
and vlan vlan-id will display the information about
the multicast MAC address entries manually
added in the specified VLAN with the specified
multicast MAC address, including the multicast