Switch 4210 V3.01.09 Release Notes
February 27, 2009 Page 24 of 43
Resolved Problems in V3.01.08
LSOD08009
z First found-in version: V3.01.06
z Condition:
In C/S network, the device acts as SSH/Telnet server, SecureCRT as SSH/Telnet client. Paste a lot of
configuration in the client window after successful login.
z Description:
Some of configurations lose.
LSOD08193
z First found-in version: V3.01.06
z Condition:
Configure password information.
z Description:
The password can be found in logbuffer, this is a hidden danger.
LSOD07800
z First found-in version: V3.01.06
z Condition:
Assign dynamic VLAN to port A, then copy the configuration of port A to port B by executing the
command “copy configuration”.
z Description:
The dynamic VLAN attribute of port A is also copy to port B.
LSOD08229
z First found-in version: V3.01.06
z Condition:
As the figure, in the network which enable STP protocol, if there are some port UP/DOWN events
occurred on the root bridge, PC1 PING PC2 continuously.
z Description:
The PING packets between PC1 and PC2 would have some packets lost.
To Next Page
Loading...
