Switch 4210 V3.01.09 Release Notes
February 27, 2009 Page 25 of 43
LSOD08289
z First found-in version: V3.01.06
z Condition:
Reboot Switch 4210 52-Port device.
z Description:
In some devices, some ports' led would be turned on however the other ports' led would be turned off.
LSOD08342
z First found-in version: V3.01.06
z Condition:
In above figure, the three devices connect with each other by 100Base-SFP. Each fiber port is
configured auto-negotiation mode. Reboot device 2.
z Description:
After reboots, the fiber port of device 2 can not forward packets.
Resolved Problems in V3.01.06
LSOD06559
z First found-in version: V3.01.05
z Condition:
Enable Dot1x, re-authentication and Dot1x handshake. Configure the period of Dot1x re-
authentication with 60 seconds and the period of handshake with 30 seconds. Set the re-transmit time
to 1. The user authenticate successfully.
z Description:
After 60 seconds, the user logged off automatically.
LSOD06992
z First found-in version: V3.01.05
z Condition:
Enable anti-attack function through the command “system-guard enable” on device.
z Description:
To Next Page
Loading...
