Switch 4210 V3.01.09 Release Notes
February 27, 2009 Page 30 of 43
Resolved Problems in V3.01.05
LSOD07514
z First found-in version: V3.01.04
z Condition:
The devices are powered on.
z Description:
Some devices can not startup, and print “Starting....” time after time.
LSOD06686
z First found-in version: V3.01.04
z Condition:
Reboot Switch 4210 52port device.
z Description:
The LEDs of all ports on device may be twinkling.
Resolved Problems in V3.01.04
LSOD05430
z First found-in version: V3.01.03
z Condition:
Enable STP on device and the port learns some ARP. Send STP TC packet to this port.
z Description:
The ARP tables of this port are deleted.
LSOD05769
z First found-in version: V3.01.03
z Condition:
Execute the “flow-interval ?” command on the port view.
z Description:
The help notation of this command has bad syntax which should be corrected as “in seconds”.
LSOD05840
z First found-in version: V3.01.03
z Condition:
Enable Dot1x and re-authentication. Configure the period of re-authentication with 60 seconds. The
user succeeds in PEAP authentication.
z Description:
The user failed in re-authentication after about 60 seconds.
To Next Page
Loading...
