EasyManuals Logo

3Com SUPERSTACK 3 3226 User Manual

3Com SUPERSTACK 3 3226
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
38 CHAPTER 3: SETTING UP FOR MANAGEMENT
Viewing IP Information via the Console Port
You are now ready to view the automatically allocated IP information
using the command line interface.
1 Connect your Switch to the network using an Ethernet cable. As soon as
a network connection is made the Switch begins the automatic IP
configuration process.
The automatic IP configuration process usually completes within one
minute.
2 The command line interface login sequence begins as soon as the Switch
detects a connection to its console port.
If the login prompt does not begin immediately, press Return a few times
until it starts.
3 At the login and password prompts, enter admin as your user name and
enter your password at the password prompt (or just press Return if you
have not yet set a password). If you have logged on correctly, the
top-level menu of the command line interface is displayed as shown in
the example in Figure 11.
Figure 11 Example top-level command line interface menu
4 At the Select menu option prompt enter the protocol ip
interface summary command. A summary of the automatically
allocated IP information is displayed. Make a note of the Network IP
Address.
The initial set up of your Switch is now complete and the Switch is ready
for you to set up your chosen management method. See “Methods of
Managing a Switch” on page 39.
Menu options: -----------3Com SuperStack 3 Switch 3226-----------------------
bridge - Administer bridge-wide parameters
feature - Administer system features
gettingStarted - Basic device configuration
logout - Logout of the Command Line Interface
physicalInterface - Administer physical interfaces
protocol - Administer protocols
security - Administer security
system - Administer system-level functions
trafficManagement - Administer traffic management
Type ? for help.
------------------------------------- (1)------------------------------------
Select menu option:
DUA1750-0AAA01.book Page 38 Friday, December 5, 2003 10:24 AM

Table of Contents

Other manuals for 3Com SUPERSTACK 3 3226

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the 3Com SUPERSTACK 3 3226 and is the answer not in the manual?

3Com SUPERSTACK 3 3226 Specifications

SuperStack 3 Switch 3226

Port Capacities IconPort Capacities
10/100 ports24
Dual-personality 10/100/1000 or SFP Gigabit ports2
Performance IconPerformance
bandwidth8.8 Gbps
throughput6.6 Mpps
Power Supply IconPower Supply
input voltage100-240 VAC
maximum power55 W
heat dissipation184 BTU
Memory IconMemory
flash memory16MB
processor memory32MB
packet buffer memory32MB
Operating Environment IconOperating Environment
operating temperature0° to 40°C
storage temperature-40° to 70°C
humidity10% to 90% non-condensing
Weight and Dimensions IconWeight and Dimensions
height45 mm
width440 mm
depth252 mm
weight4.3 kg

SuperStack 3 Switch 3250

Port Capacities IconPort Capacities
10/100 ports48
Dual-personality 10/100/1000 or SFP Gigabit ports2
Performance IconPerformance
bandwidth13.6 Gbps
throughput10.1 Mpps
Power Supply IconPower Supply
input voltage100-240 VAC
maximum power84 W
heat dissipation287 BTU
Memory IconMemory
flash memory16MB
processor memory32MB
packet buffer memory64MB
Operating Environment IconOperating Environment
operating temperature0° to 40°C
storage temperature-40° to 70°C
humidity10% to 90% non-condensing
Weight and Dimensions IconWeight and Dimensions
height45 mm
width440 mm
depth333 mm
weight5.3 kg

Related product manuals