3D Prototyping X1
34
5. Print Steps
1. Turn on the power, and connect USB cable.
2. Install the driver and print software according to the wizard. (Only need to do this
once when connecting the printer to the same computer.)
3. Open the printer software 3dStart.exe.
4. Wait for auto-connection. Choose the number for the “COM” which is found from
the device manager when the computer is connecting to many printers.。
figure5.1
figure5.2
5. Check build platform level is horizontal. Refer to 7.4 for detail; Make sure the nozzle is
clean before printing.
6. Ways to open models：
Click ->“open”to choose a model file。
Click ->“add”to choose an existed model from recent files
Click ->“model” to choose a test model
Drag the STL model to the view area in the software
To Next Page
Loading...