15
16. Insert the print jet (from the cartridge that will be mounted
on the right side of the printer) into the top of the printer.
Rotate the print jet clockwise until the dots align.
NOTE: As you rotate the print jet, ensure the
print jet tube is tucked under the top of the
printer cover.
17. Select the checkmark to continue.
18. Mount a material cartridge on the right side of the printer
and select the checkmark to continue.
NOTE: The print jet will begin to heat. Once the
print jet has reached the proper temperature,
the printer will prime melted material into the
refuse bin.
To Next Page
Loading...
