3D Systems CUBE Lesson

Fastening the Print Tip on a Cube X
5. Continue raising the print pad until there is approximately
0.5mm between the print pad and the CubeX wiping stick.
6. Turn the CubeX printer off and unplug it from the mains
power supply.
14

3D Systems CUBE Specifications

General

Print technology	Plastic Jet Printing (PJP)
Printing material	ABS, Polylactic acid (PLA)
Number of printing colors	16
Maximum build size (WxDxH)	- mm
Plug and Play	Yes
USB version	2.0
Ethernet LAN	No
Card reader integrated	-
Product color	Silver