ProJet
®
860Pro User Manual Troubleshooting the ProJet x60Pro
3dscentral.3dsystems.com 69 All Rights Reserved
5/12/13
7.6 Motion Errors - Slow Axis
There are a number of Error Codes the printer may report that all relate to the Slow Axis, and that all
share a common set of solutions.
Error Codes covered in this section:
• Error 2301:0 Motors Not Rezeroed
• Error 2303:0 x Axis Pos Error
• Error 2305:0 x Axis Settle Error
• Error 2400:0 x Axis Seek Error
• Error 3011 System Error
• Error 3013 Sequencer Timeout
• Error 43000 Sequencer Timeout
For more detailed information on what these errors mean, see Section 7.13, ’Error Codes and Messages -
Background Details’.
How to do it
To perform the cleaning and lubrication called for in the flowchart, see:
• Section 6.7, ’Clean The Slow Axis Rails and Pulleys’
• Section 6.4, ’Slow Axis Bearing Lubrication’
To Next Page