3M 3M-Matic 8000af - Spare Parts;Service Information; Recommended Spare Parts; Replacement Parts and Service

North American - ENG
Date Released:
05-22-18
3M-Matic
™
Accuglide 3 - 2 Inch Taping Head - Type 10800
Page 19
44-0009-2070-0 / ECO#0078483
Recommended Spare Parts
Listed are a set of spare parts that will periodically require replacement due to normal
wear. These parts should be ordered to keep the taping heads in production:
AccuGlide™ 3 Upper Taping Head - 2 inch
Qty. Part Number Description
4 78-8076-4500-3 Stud – Mounting
1 78-8137-3311-6 Spring – Upper Extension
1 78-8017-9173-8 Blade – 65mm/2.56 Inch
2 78-8052-6602-6 Spring – Cutter
1 78-8076-4726-4 Tool – Tape Threading
AccuGlide™ 3 Lower Taping Head - 2 inch
Qty. Part Number Description
1 78-8017-9173-8 Blade – 65mm/2.56 Inch
2 78-8052-6602-6 Spring – Cutter
4 78-8076-4500-3 Stud – Mounting
1 78-8137-3312-4 Spring – Lower Extension
1 78-8076-4726-4 Tool – Tape Threading
In addition to the above set of spare parts supplied with the taping head, it is suggested
that the following spare parts be maintained which will require replacement under normal
wear of the taping head.
Qty. Part Number Description
1 78-8057-6179-4 Roller – Applying
1 78-8057-6178-6 Roller – Buffi ng
1 78-8113-7030-9 Spring – Torsion
Replacement Parts and Service
Refer to the fi rst page of this instruction manual “Replacement Parts and
Service Information".
Spare Parts/Service Information