3M 3M-Matic 8000af - Replacement Parts Illustrations and Parts List

North American - ENG
Date Released:
05-22-18
3M-Matic
™
Accuglide 3 - 2 Inch Taping Head - Type 10800
Page 21
44-0009-2070-0 / ECO#0078483
Replacement Parts Illustrations and Parts Lists
AccuGlide™ 3 High Speed 2 Inch Upper Taping Head, Type 10800
AccuGlide™ 3 High Speed 2 Inch Lower Taping Head, Type 10800
1. Refer to the Taping Head Assemblies Figure to  nd all the parts illustrations
identi ed by  gure numbers.
2. Refer to the  gure or  gures to determine the individual parts required and
the parts reference number.
3. The replacement parts list, that follows each illustration, includes the part number and
part description for the parts in that illustration.
Note – The complete description has been included for standard fasteners and
some commercially available components. This has been done to allow
obtaining these standard parts locally, should the customer elect to do so.
4. Refer to the  rst page of this instruction manual "Replacement Parts and Service
Information" for replacement parts ordering information.
Important – Not all the parts listed are normally stocked items.
Some parts or assemblies shown are available only on a special order basis.
Contact 3M/Tape Dispenser Parts to con rm item availability.
Spare Parts/Service Information (continued)