North American - ENG
Date Released:
October 2018
3M-Matic
™
8000af - Type 11800
Page 13
44-0009-2153-4 / ECO# 0078045
4. Speci cations (continued)
4.5 Setup Recommendations:
• Machine must be level.
• Customer supplied infeed and exit conveyors (if used) should provide straight and
level box entry and exit.
• Exit conveyors (powered or gravity) must convey sealed boxes away from machine.
4.6 Tape:
Scotch
TM
brand pressure-sensitive lm box sealing tapes.
4.7 Tape Width:
36mm [1-1/2 inch] minimum to 48mm [2 inch] maximum
4.8 Tape Roll Diameter:
Up to 405mm [16 inch] maximum on a 76mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
TM
brand lm tapes.)
4.9 Tape Application Leg Length – Standard:
70mm ± 6mm [2-3/4 inch ±1/4 inch]
Tape Application Leg Length – Optional:
50mm ± 6mm [2 inch ±1/4 inch]
(See "Special Set-Up Procedure" – Changing the Tape Leg Length")
4.10 Box Board:
Style – regular slotted containers – RSC
125 to 275 P.S.I. bursting test, single wall B or C ute.
To Next Page
Loading...
