North American - ENG
Date Released:
October 2018
3M-Matic
™
8000af - Type 11800
Page 60
44-0009-2153-4 / ECO# 0078045
20. Optional Accessories
800af Adjustable Case Sealer,
Type 40800
Frame Assemblies
To Order Parts:
1. Refer to rst illustration,
Frame Assemblies, for the
Figure Number that identi es
a speci c portion of the machine.
2. Refer to the appropriate Figure
or Figures to determine the
parts required and the parts
reference number.
3. The Parts List that follows
each illustration, includes the
Reference Number, Part Number
and Part Description for the parts
on that illustration.
Note – The complete description
has been included for standard
fasteners and some commercially
available components. This has
been done to allow obtaining
these standard parts locally,
if desired.
4. Order parts by Part Number,
Part Description and Quantity
required. Also include the
model/machine name, machine
type, and serial number that are
located on the identi cation plate.
5. Refer to the rst page of this
instruction manual “Replacement
Parts and Service Information”
for replacement parts ordering
information.
Important – Not all the parts listed
are normally stocked
items. Some parts or
assemblies shown are
available only on
special order.
Contact 3M/Tape
Dispenser Parts to
con rm item
availability
Options and Accessories
For additional information on the options and
accessories listed below - contact your
3M Representative.
Part Number Option / Accessory
78-8069-3983-7 Caster Kit Attachment
78-8069-3926-6 Low Tape Sensor Kit
70-0064-4963-4 AccuGlide™ 3 Upper Taping Head
2 inch, Type 10800
70-0064-4962-6 AccuGlide™ 3 Lower Taping Head
2 inch, Type 10800
70-0064-1097-4 Tape Monitor Kit (TAM)
78-8095-4854-4 2 Inch Tape Edge Fold - Top
78-8095-4855-1 2 Inch Tape Edge Fold - Bottom
To Next Page
Loading...
