3M Accuglide 3 - Intended Use

NA - ENG
April 2017
3M-Matic
™
Accuglide 3 - 2 Inch Taping Head
Page 1
AccuGlide™ 3 Upper Taping Head - 2 inch, Type 10800
Intended Use
The intended use of the AccuGlide™ 3 Upper and Lower Taping Heads - 2 Inch is to apply a
“C” clip of Scotch
®
pressure-sensitive  lm box sealing tape to the top and/or bottom center
seam of regular slotted containers.
These taping heads are incorporated into most standard 3M-Matic™ case sealers.
The compact size and simplicity of the taping head also makes it suitable for mounting in
box conveying systems other than 3M-Matic™ case sealers. This includes replacement
of other types of taping, gluing or stapling heads in existing case sealing machines.
The AccuGlide™ 3 Upper and Lower Taping Heads - 2 Inch have been designed and
tested for use with Scotch
®
pressure-sensitive  lm box sealing tape.