3M DBI-SALA Nano-Lok - Component Specifications; Connector Specifications; Performance Specifications

15
;
Before using this equipment, record the product identication information from the ID label in the ‘Inspection and
Maintenance Log’ at the back of this manual.
DESCRIPTION:
Figure 2 identies key components of the 3M™ DBI-SALA
®
Nano-Lok Self-Retracting Devices (SRDs). Nano-Lok SRDs are drum
wound Web Lifelines (A) with an in-line Energy Absorber (B) that retracts into a Nylon Housing (C). A Swivel Eye (D) on the
top of the Housing allows attachment to a valid anchorage connection point with a Carabiner (E), or mounting on a Full Body
Harness with a Harness Interface (F). Figure 1 identies available Nano-Lok models and their connector congurations. See
Table 1 for Nano-Lok SRD and connector specications.
Table 1 – Specications
Component Specications:
SRL Housings Nylon
Drum Nylon
Internal Components Stainless Steel, Aluminum
Web Lifeline Dyneema Polyester
Energy Absorber Cover: Nitrile Rubber, Web: Polyester, Stitching: Polyester or Nylon Thread
Swivel Zinc Plated Steel
Connector Specications:
Description Material Gate Opening Gate Strength Tensile Strength
1 Swivel Eye Steel
22.35 mm (0.88 in)
inside diameter
X 22.2 kN (5,000 lbs)
2 Carabiner Aluminum 19 mm (3/4 in) 16 kN (3600 lbs) 22.2 kN (5000 lbs)
3 Carabiner Steel 19 mm (3/4 in) 16 kN (3600 lbs) 22.2 kN (5000 lbs)
4 Single SRD Interface Steel 51 mm (2 in) 16 kN (3600 lbs) 22.2 kN (5000 lbs)
5 Twin SRD Interface Steel w/Nylon Insert 19 mm (3/4 in) 16 kN (3,600 lbs 22.2 kN (5000 lbs)
6 Carabiner Aluminum, Steel 56 mm (2.19 in) 16 kN (3600 lbs) 22.2 kN (5000 lbs)
7 Carabiner Aluminum 19 mm (3/4 in) 16 kN (3600 lbs) 22.2 kN (5000 lbs)
8 Rebar Hook Aluminum 57 mm (2-1/4 in) 1 kN (225 lbs) 22.2 kN (5000 lbs)
9 Rebar Hook Aluminum 63 mm (2-1/2 in) 16 kN (3600 lbs) 22.2 kN (5000 lbs)
10 Carabiner Aluminum 52 mm (2 in) 16 kN (3600 lbs) 22.2 kN (5000 lbs)
11 Rebar Hook Aluminum, Steel 63 mm (2-1/2 in) 16 kN (3600 lbs) 22.2 kN (5000 lbs)
12 Carabiner Steel 19 mm (3/4 in) 16 kN (3600 lbs) 22.2 kN (5000 lbs)
13 Rebar Hook Aluminum 57 mm (2-1/4 in) 16 kN (3600 lbs) 22.2 kN (5000 lbs)
14 Snap Hook Steel 19 mm (3/4 in) 16 kN (3600 lbs 22.2 kN (5000 lbs)
Performance Specications:
SRL Specications (Vertical) CE Models
Capacity Range 59 kg - 100 kg (130 lbs - 220 lbs) 100 kg - 140 kg (220 lbs - 310 lbs)
Maximum Arresting Force 6 kN (1350 lbs) 6 kN (1350 lbs)
Average Arresting Force 4 kN (900 lbs) 4 kN (900 lbs)
Claimed Maximum Arresting Distance
1
0.61 m (24 in) 0.61 m (24 in)
Minimum Fall Clearance Required
1
1.5 m (5 ft) 1.8 m (5.8 ft)
Maximum Free Fall
2
1.5 m (5 ft) 1.5 m (5 ft)
1 - Assumes the SRL is mounted directly above (overhead) the end user.
2 - Measured from user D-Ring to walking/working surface. Refer to Fall Clearance Chart(s) for details.