4
Installation Instructions G5 - Revision C, October 2019
3M™ Drive-Thru System Model G5
To reduce the risks associated with fire, explosion and property damage:
• Immediately discontinue use of the battery if, at any time, the battery feels hot, changes color or shape, emits an unusual smell,
or appears abnormal or damaged in any other way.
• Do not open, disassemble, pierce, crack, crush, incinerate or expose to heat above 55°C/130°F. Keep batteries away from
children.
• Do not store or carry batteries with metal objects. Store batteries in cool, dry, clean places.
• Always replace batteries, battery chargers and power supplies, and all other system components with 3M-approved units accept-
able for use in this system to avoid system malfunction and safety concerns. Replace model XT-1 battery with Model C1060/XT-
1 only. Replace model G5 battery with Model G5L1 3M only. Use of another battery may present a risk of fire or
explosion.
• Do not immerse batteries in water or other liquids.
• Do not use batteries that feel hot or that have changed in color or shape, emit an unusual smell, or appear damaged or abnormal
in any other way.
• Discontinue use if damage or abnormalities are observed. Conduct regular visual inspections of batteries to look for damage or
abnormalities, such as changes in shape or color.
• Use only 3M-approved batteries.
• The 3M™ Drive-Thru Headset Battery Charger G5 12-slot and the 3M™ Drive-Thru Headset Charging Station G5 are supplied with
two power connections to allow for an additional charger and/or Basestation. During installation, do not connect more than one
power supply to one charger, or to the interconnected string of chargers.
• Do not modify 3M™ Wireless Communication System Model XT-1, or 3M™ Wireless Communication System Model G5.
• For additional charging and use instructions, review the Installation Manual and the Operating Instructions.
To reduce the risks associated with environmental contamination due to battery pack:
• Dispose of batteries, power supplies, battery charger and Basestation in accordance with federal, state and local requirements.
If preferred, return these components to 3M Service Center for recycle.
• Many rechargeable batteries are required to be recycled by local, state/province and national laws. To properly recycle/dispose
of the battery or battery pack, always follow local solid waste disposal regulations. Additionally, in the United States and Canada,
3M is partnering with Call2Recycle (RBRC) to provide recycling service to you to help ensure that the rechargeable batteries within
our products are recycled properly. To assist you in using this service, call the Call2Recycle battery recycling information help line
at 1-800-8-BATTERY (1-800-822-8837) or consult Call2Recycle’s battery recycling guidance online at
www.call2recycle.org.
To Next Page
Loading...
