EasyManua.ls Logo

3M Drive-Thru G5 - Page 53

3M Drive-Thru G5
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
52
Installation Instructions G5 - Revision C, September 2019
3M™ Drive-Thru System Model G5
Table F. G5 Battery Indicator Light Modes
Indicator Mode Description
Green LEDs The battery is out of the G5 Battery Charger and the button has been pressed and
held down.
Each LED represents 25% charge.
A fully charged battery would have all 4 LEDS lit Green.
From the top (in the diagram on the left):
4 successive LEDs lit green indicates a charge between 75% and 100%.
3 successive LEDs lit green indicates a charge between 50% and 74%.
2 LED lit green indicates a charge between 25% and 49%.
1 LED lit green indicates a charge between 0% and 24%.
One of the LEDs is blinking Green The battery is in the Charger and is currently charging
From the top:
1st LED flashing Green – Battery currently between 0 and 25% charge.
2nd LED flashing Green – Battery currently between 26 and 50% charge.
3rd LED flashing Green – Battery currently between 51 and 75% charge.
4th LED flashing Green – Battery currently between 76 and 100% charge.
Top and Bottom LEDs are Green Battery End of Life.
Replace the battery.

Table of Contents

Other manuals for 3M Drive-Thru G5

Related product manuals