Installation Instructions G5 - Revision C, September 2019
27
3M™ Drive-Thru System Model G5
Installation Instructions G5
Revision C, September 2019
Run Mode Menu
When the system is powered up and functioning normally, the Run mode menu appears on the display. Figure 22 shows the Run mode menu.
Figure 22.
Navigating in the Basestation in Run Mode
To navigate the Basestation in Run mode you only need to use Enter, Mode, and the directional arrow buttons. The remaining buttons
function only in manager or installer configuration modes.
Special Short Cut Keys
While on the Run Mode and no fields are selected for editing, the left and right buttons act as short cut keys to two frequently
accessed configuration screens. Pressing the right button launches the Greeter Message Activation screen. Pressing the left button
launches the Add New Headsets screen.
To Next Page
Loading...
