3M HCD-1 - HOW TO CLEAN EXCESS WATER RECEIVER

11
• When the indicator is at level 4, tapping the Cold button will bring the Cold Water Temperature to
level 0.
4. After the temperature is set, tap the Power button to save the settings, or wait for 10 seconds for the
settings to be saved automatically.
5. Tap the Power button to switch on the dispenser and continue with use.
HOW TO CLEAN EXCESS WATER RECEIVER
1. Remove the excess water receiver.
2. Separate the grill from the excess water
receiver.
3. Drain all water from the receiver, and wipe the
receiver clean with soft cloth.
4. Place the excess water receiver back in position.